The evolution continues. parallign clamping for stone products.

Thousands of solid surface fabricators around the world are now using our parallign clamps for their seams. Many asked for a heavy duty version for stone products. Here it is. Happy installing.

 

POWERFUL CLAMPING MECHANISM

Seams are quickly opened or closed just by running the palm of your hand over the roller nut. Ball bearings and a polished thread acme screw push or pull on the connecting rod. This system provides speedy and powerful clamping with a minimum of effort.

 

THE POWER TO ALIGN HEAVY STONE TOPS

The two clamp halves are aligned with precision ground steel guide rods. These rods are anchored to one side, and slide in precision bronze sleeves on the other side. The photo at left shows two pieces of engineered stone with one GORILLA clamp over the seam. These pieces are supported only at the ends. That's real alignment power!

ELECTRIC VACUUM PUMP FOR RELIABLE HOLDING POWER

An electric vacuum pump is used to insure reliable, consistent, and powerful clamping of the pods to the deck. Slightly porous stones will not be a problem, as the clamps will still work with several business cards underneath creating leaks around the gasket. You will no longer have the problem of suction cups popping off when your back is turned.

 

Basic Instructions for Use:

  1. Shim the slabs close to level and dry clamp the seam, taking care to align the front edges perfectly.
  2. Use the clamp to spread the seam open enough to apply the adhesive.
  3. Remove one clamp and apply adhesive to half of the seam, reattach and repeat for the other seam half.
  4. Spin the roller nuts to close the seam, it will go back just as perfect as when it was dry clamped.
  5. Wet adhesive can be scrapped off by repeating a process similar to step 3 above.